Packet loss detection in networked control systems

One of the main issues related to the reliable operation of network control systems concerns the design of mechanisms able to detect anomalies in the functioning of the communication network through which the control loops are closed. In this article, we address the problem of detecting the occurrence of packet losses and design a mechanism that can detect the occurrence of packet losses directly from process sensor data. Specifically, we propose a moving‐horizon estimation scheme that permits to detect if the packet‐loss rate exceeds prescribed thresholds, which are representative of stability and performance of the control system. We discuss theoretical properties of the proposed solution along with an approximation scheme with reduced computational burden. A numerical example is discussed to substantiate the analysis.     

Sustainable control strategies for plant protection and food packaging sectors by natural substances and novel nanotechnological approaches

An overview is provided of the current technological strategies (also at the nanoscale level) recently involved in plant and/or food protection. In addition, the potential use of natural and sustainable substances, instead of traditional synthesized molecules or chemical-based compounds, is addressed both with respect to packaging systems and novel pesticide formulations. In this context, nanotechnological approaches represent promising strategies for the entire agriculture industry chain, from the field to consumers. Traditional plant protection strategies are often insufficient and the application of chemical-based pesticides has negative effects on animals, humans and the environment. Novel greener tools could represent efficient alternatives for the management of plant diseases using promising strategies; the use of nanotechnologies allows the promotion of the more efficient assembly and subsequent release of environmentally sustainable active principles, limiting the use of chemicals in terms of economic losses. At the same time, new sustainable, antimicrobial and antioxidant systems have been rapidly promoted and investigated in the food packaging sector as a valid eco-friendly possibility for improving the safety and quality of food products and reducing and/or limiting the environmental impact with respect to traditional materials. Together, the scientific community and the growing interest of consumers have promoted the development of new edible and eco-friendly packaging that reduces waste and any environmental impact. In this context, the aim is to provide evidence of the usefulness of strategies aiming to limit agrochemicals, as well as the potential of nanomaterials, in sustainable plant and food protection for agriculture management and the packaging sector. © 2018 Society of Chemical Industry     

A unified view of parameterized verification of abstract models of broadcast communication

International Journal on Software Tools for Technology Transfer - We give a unified view of different parameterized models of concurrent and distributed systems with broadcast communication based...     

The proton iron-sulfur cluster environment of the [FeFe]-hydrogenase maturation protein HydF from Thermotoga neapolitana

[FeFe]-hydrogenases contain a complex [4Fe–4S]-2Fe cluster (H-cluster) and are able to efficiently reduce protons to H₂. Due to their potential exploitation for renewable energy production biotechnologies, significant efforts have been put into understanding the mechanisms driving the H-cluster assembly, which involves three conserved proteins. Among them, HydF works as scaffold upon which the H-cluster precursor is synthesized and carrier to deliver it to the hydrogenase, resulting in its activation. A FeS cluster binding sequence (CxHx₄₆-₅₃HCxxC) is conserved in all HydF proteins and should in principle provide four ligands to coordinate the Fe atom. However, we found that alternative metal coordination may exist in different HydF proteins and that only the three cysteines are strictly required, whereas the fourth ligand may vary and is, in any case, readily exchangeable. In this work we analyzed by EPR/HYSCORE the FeS cluster proton environment of HydF from Thermotoga neapolitana to determine the possible role of surrounding residues in the non-cysteinyl iron ligation of the protein.     

Heuristic approaches for the optimal wiring in large scale robotic skin design

This paper faces the problem of optimizing the wiring and the connections in a tactile skin for robots. The robotic skin is a device composed of a network of tactile sensors, whose wiring can be very complex: the control of this complexity is a key problem. In the considered robotic skin, skin elements are grouped into skin patches, which output tactile data that have to be read by a micro-controller. The logical connections between the sensors must be defined in order to route signals through the network. A finite set of micro-controllers is given and a set of constraints is imposed on the given assignment and routing. The considered problem has a combinatorial nature and it can be formulated as a Minimum Constrained Spanning Forest problem with costs on arcs that cannot be a priori defined as they are solution-dependent. The problem is NP-hard. The paper introduces a mathematical formulation and then proposes a Multi-Start Heuristic algorithm and an Ant Colony Optimization approach whose effectiveness is evaluated through experimental tests performed on both real and synthetically generated instances.     

FMS for Unmanned Aerial Systems: HMI Issues and New Interface Solutions

To integrate UASs in the NAS, an improvement in navigation, planning, communication and 4D trajectory control capabilities is mandatory. A way to obtain this enhance is to adopt a Flight Management System. A FMS for an UAS has some differences with respect to one for a manned aircraft, in terms of architecture and performed functions. In particular, from HMI point of view, the specific UAS human factor issues shall be added to the current manned FMS interface lacks. Starting from these considerations, a new FMS HMI for the Alenia Aeronautica TCS has been developed, using as data entry devices two touch screens.     

Double actuation architectures for rendering variable impedance in compliant robots: A review

Novel compliant actuation systems have been developed in recent years for a variety of possible advantages, such as establishing a safe human–robot interaction, increasing energy efficiency, reducing the effects of impacts and even for the development of neuro-inspired robotic platforms to be used in human motor control studies.In this rapidly growing and transversal research field, systems involving more than one active element (typically motors) for each actuated degree of freedom are being investigated to allow separate position and impedance regulations. Considering the wide range of applications and the large number of different arrangements deriving from the combination of two active elements and passive elastic components, several actuation architectures have been devised.This paper reviews state-of-the-art rotary variable impedance units incorporating two separate motors. Existing devices are grouped in three main categories. A critical and comparative analysis of the most relevant features is carried out, also based on most representative prototypes. Recently proposed methodologies and evaluation criteria for design optimization are illustrated and perspectives on potential applications of double actuation systems are presented.     

A variational integrators approach to second order modeling and identification of linear mechanical systems

The theory of variational integration provides a systematic procedure to discretize the equations of motion of a mechanical system, preserving key properties of the continuous time flow. The discrete-time model obtained by variational integration theory inherits structural conditions which in general are not guaranteed under general discretization procedures. We discuss a simple class of variational integrators for linear second order mechanical systems and propose a constrained identification technique which employs simple linear transformation formulas to recover the continuous time parameters of the system from the discrete-time identified model. We test this approach on a simulated eight degrees of freedom system and show that the new procedure leads to an accurate identification of the continuous-time parameters of second-order mechanical systems starting from discrete measured data.     

Cycling reliability of RF-MEMS switches with Gold–Platinum multilayers as contact material

Microsystem Technologies - Contact resistance is the main parameter used for assessing the high cycling reliability of RF microelectromechanical (RF-MEMS) switches. In this paper the use of a...     

Neural approach for temperature‐dependent modeling of GaN HEMTs

Gallium nitride high electron‐mobility transistors have gained much interest for high‐power and high‐temperature applications at high frequencies. Therefore, there is a need to have the dependence on the temperature included in their models. To meet this challenge, the present study presents a neural approach for extracting a multi‐bias model of a gallium nitride high electron‐mobility transistors including the dependence on the ambient temperature. Accuracy of the developed model is verified by comparing modeling results with measurements. Copyright © 2014 John Wiley & Sons, Ltd.